Temperature Sensor

2 x 2-wire, 4-20 mA or 0-10 VDC outp u ts■ Any or both outputs can be assigned to Relative Humidity or Temperatureor Dewpoint or specific derived physical quantity■ RH & T range selection, parameter configuration and calibration with- USB to serial converter (DCC501)- Handheld configurator (HHC202)- Inbuilt LCD and 3 keys■ Heartbeat LED for device health status■ Isolated Modbus® RTU or BACnet MS/TP (RS485)■ Derived physical quantities- Dewpoint- Absolute Humidity- Heat Index- Enthalpy■ High degree of protection against condensation & pollution■ Surface (Wall), Duct, Outside & Remote sensor option available■ Convenient installation with 2-part housing with fixed back and removable electronics■ Integral sensor (default) or remote sensor■ Flush mount application

• 2, 3 or 4-wire platinum element in simplex or duplex assembly
• Temperatue range: -50 to 250°C
• Triple element assembly in 6 mm diameter on request
• Standard lengths : 100mm, 150mm and 300mm( Longer assemblies not recommended)
• Standard 6mm sheath diameter, other sheath diameter available on request
• Termination : Weatherproof Die cast aluminum head with threaded cap and chain
• 1/2"BSP (F) single cable entry with single compression gland
• Different types of terminal heads available
• SS316 sheath material as standard

• Item Code: SRATH
• Minimum Order Quantity: 1 Piece(s)

Features

• Used at high temperature in furnaces with toxic gases
• Inner sheath-High quality ceramic
• Used with SS446 outer sheath for incinerators
• Resistant to thermal shocks
• 21.3 mm OD for outer sheath as standard
• Bar stock sheaths available in 21, 24, 27 & mm diameters
• One end closed recrystallized alumina tubes are used as inner sheaths as a standard
• Available with all types of process connections

• Item Code: MTMO

FRCT 202 is a rate indicator housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA & IIB with IP65 rating - completely dust proof and a good level of protection against water. FRCT 202 is a programmable RPM indicator typically used to measure motor and shaft speeds up to 5000 Hz.The rate-indicator receives input from proximity switches, voltage pulses, photoelectric switches, limit switches, electromagnetic pickups among st others.  FRCT 202 features a single 4-digit programmable LED display,which indicates the measured process value.

• Multi function Memory Timer
• IP65
• Gas Groups I, IIA and IIB

• Item Code: FRCT202
• Minimum Order Quantity: 1 Piece

Features

• Measurement Range: Temperature: -58 to 302°F (-50 to 150°C); 
• Input: Up to 2 thermistors and 1 humidity sensor
• Output: 4 SPST, 8A relays @ 250 VAC
• Horsepower Rating (HP): 1/3 HP
• Control Type: On/Off direction, direct or reverse acting, neutral
• Power Requirements: 110 or 230 VAC (depending on model)
• Accuracy: Temperature: ±0.5% of probe range; Humidity: ±3% (20 to 80%) of range
• Display: Two 3-digit displays. 1/2" digits
• Resolution: 0.1°
• Memory Backup: Nonvolatile memory
• Ambient Operating Temperature: 32 to 158°F (0 to 70°C)
• Storage Temperature: -4 to 176°F (-20 t 80°C)
• Weight: 1.17 lb (530 g)
• Panel Cutout: 5.15" x 3.97" (131 x 101 mm)
• Front Panel Protection: IP64
• Agency Approvals: CE

• Item Code: SeriesTHC
• Minimum Order Quantity: 1 Piece(s)

Features

• Accuracy: Platinum RTD: ±0.6% @ 32°F (0°C); Nickel RTD: ±0.5°F @ 32°F (0°C); Thermistors: ±0.36°F from 32 to 158°F (0 to 70°C), Balco RTD: ±0.1% @ 32°F (0°C)
• Operating Temperature: -32 to 240°F (-35.5 to 115.5°C)
• Probe Diameter: 1/4" (6.3 mm)
• Cable Length: 8"
• Probe Material: 304 SS
• Mounting: 1/2" threaded connection to fit IW2 Series Thermowell

• Item Code: SeriesI-24

Features

• Accuracy: Platinum RTD: ±0.6% @ 32°F (0°C);Balco RTD: ±0.1% @ 32°F (0°C);Nickel RTD: ±0.5°F @ 32°F (0°C);Thermistors: ±0.36°F from 32 to 158°F (0 to 70°C)
• Operating Temperature: -32 to 240°F (-35.5 to 115.5°C)
• Probe Diameter: 1/4" (6.3 mm)
• Cable Length: 8"
• Probe Material: 304 SS
• Mounting: 1/2" threaded connection to fit IW2 Series Thermowell

• Item Code: SeriesI2-4